The orthopedically designed four section sleep deck can be placed into the following commonly needed positions: Contour, Fowler and Semi-Fowler, Frame Trendelenburg and Reverse Trendelenburg, Cardiac Chair, Nursing or Feeding, Vascular. Sleep Deck Low Height 15.50" Sleep Deck High Position 26" - with a 6" mattress meets stretcher height at 32" Built in Stabilizer Legs (Lifts bed off casters in low position - prevents bed movement) Staff Control Panel at foot end of bed, allows total operation of all bed function as well as lock out of patient pendant if desired Auxiliary crank for power failure emergencies Traction frame adaptor is standard on beds with blow molded Hd / Ft bds.Traction frame adaptor is an extra cost option on beds with laminate Hd / Ft bds. Standard with Link Spring Fabric Deck (above picture shown with optional perforated steel pan deck) 5" Caster System. 1 Total Lock, 1 Steer, 2 Swivel. Six Integrated IV Sockets (2 - ½" and 2 - Ύ" sockets at head; 2 - ½" at seat) on the Alpha beds with Blow Molded Hd and Ft but only four IV Sockets on the Alpha beds with laminate Hd and Ft bds. Removable high impact polypropylene foot and head panels with built in tubular push bars for safe and efficient transport or Decorator Laminate Panels Uni-body undercarriage is a welded base for strength and durability Standard 115 volt UL2601-1 and CAN/CSA C22.2 No. 6014-M90 Approved Motor drive units are AC powered with 110/115v or optional 220/240v; all are UL listed. Optional 240 Volt available Warranty: Electronics: 2 Years - All other components: 15 Years
Manufacturer: Graham Field
Order / Info Request
Wide bed with 84" mattress and 700 lb weight capacity.
Manufacturer: Invacare
Fixed Height, Hi-Lo Manual, Semi-Electric and Full-Electric available. Available in 76" and 80" sleep deck lengths. Low position 14.5", maximum height 26". Available with spring or pan sleep deck. Stabilizing legs standard. Durable powder-coated epoxy finish. 450 lb weight capacity. UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved. Warranty: 1. Electronics: 2 Years 2. All other components: 15 Years
On this Invacare Fully Electric Home Care Bed, all positions are easily controlled electrically by the patient or caregiver. The hand pendant controls the positioning of the upper body and/or knees, and can be placed anywhere for maximum patient comfort. The adjustability of this bed increases user comfort and safety by offering endless positioning.* Effortless operation.* Pinch-free design guarantees safety for both patients and caregivers.* Maximum bed strength and support can be found in the reinforced headspring.* Mechanically welded steel frame construction.* Weight Capacity is 350 lbs. for patient's weight and operating capacity of 450 pounds (inclusive of all accessories).
The full-electric hospital beds feature durable powder-coated epoxy finish.. Head articulation of 80 degrees for assistance with respiratory ailments. Foot/knee articulation of 45 degrees. Accommodates any head or foot board options. UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved. The head and foot boards are available with light oak, medium oak or dark walnut finishes. Designed to meet the requirements of applicable HCPCS codes. Innerspring mattresses of different sizes for homecare / nursing home care are sold separately. Warranty: Welded steel bed frame: Limited Lifetime. All other components: Five Years. Electronics: Two Years Bed Height: 7 1/2" to 16 3/4" Sleeping Surface Length: 76" or 80" Sleeping Surface Width: 35" Max. Head Elevation: 80o Max. Foot / Knee Elevation: 45o Weight Capacity: 400 lbs.
Product Detail This bed represents a true engineering breakthrough, combining long term care needs with acute care features. The Eze-Lok bed features a single pedal to secure the bed to the floor at any sleep surface height. The color-coded pedals show green for mobile and red for securely-locked. 12" Low deck height. Available in Manual Hi-Lo, Semi-Electric and Full-Electric. Available with spring or pan sleep deck. Durable powder-coated epoxy finish. Designed to meet the requirements of applicable HCPCS codes. 400 lb weight capacity. UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved. Available in 76", 80", or 84" sleep deck lengths. Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years Inventory Stock Code Description Color Packaging HCPCS AE4000 Spring Deck, Manual Hi-Lo, 76" Length 1 ea E0293 AE4100 Spring Deck, Manual Hi-Lo, 80" Length 1 ea E0293 AE4200 Spring Deck, Manual Hi-Lo, 84" Length 1 ea E0293 AE4010 Pan Deck, Manual Hi-Lo, 76" Length 1 ea E0293 AE4110 Pan Deck, Manual Hi-Lo, 80" Length 1 ea E0293 AE4210 Pan Deck, Manual Hi-Lo, 84" Length 1 ea E0293 AE4005 Spring Deck, Semi-Electric, 76" Length 1 ea E0295 AE4105 Spring Deck, Semi-Electric, 80" Length 1 ea E0295 AE4205 Spring Deck, Semi-Electric, 84" Length 1 ea E0295 AE4015 Pan Deck, Semi-Electric, 76" Length 1 ea E0295 AE4115 Pan Deck, Semi-Electric, 80" Length 1 ea E0295 AE4215 Pan Deck, Semi-Electric, 84" Length 1 ea E0295 AE4004 Spring Deck, Full-Electric, 76" Length 1 ea E0297 AE4104 Spring Deck, Full-Electric, 80" Length 1 ea E0297 AE4204 Spring Deck, Full-Electric, 84" Length 1 ea E0297 AE4014 Pan Deck, Full-Electric, 76" Length 1 ea E0297 AE4114 Pan Deck, Full-Electric, 80" Length 1 ea E0297 AE4214 Pan Deck, Full-Electric, 84" Length 1 ea E0297 AB46300 Head and Foot Boards Light Oak Finish AB48300 Head and Foot Boards Medium Oak Finish AB80300 Head and Foot Boards Dark Walnut Finish A7040 Half Head Rails (Set) A7050 Half Foot Rails (Set) A7060 3/4 Length Rail- 54" Length (Set) A7070 Full Length Rail- 66" Length (Set) AZ7350 Assist Bar (1 Each) A65476 Wall Saver Bumpers, 76" Bed A65480 Wall Saver Bumpers, 80" Bed AB6800 Wall Saver Bumpers, 84" Bed 999-0700-355 Factory-Installed options - Pull Pin Pendant L/O CA** 554-0658-000 Factory-Installed options - Edema Foot Ratchet 555-0206-902 Emergency Crank 554-0639-000 Trapeze Adapter 556-0005-000 Traction Frame Adapter (2 Req) 554-0143-000 Trapeze Bar (Patient Helper Bar) 554-0190-000 Panel-Mounted I.V. Holder 554-0713-000 Side Mattress Retainer (Pair)
Product Detail Fixed Height, Hi-Lo Manual, Semi-Electric and Full-Electric available. Available in 76" and 80" sleep deck lengths. Low position 14.5", maximum height 26". Available with spring or pan sleep deck. Stabilizing legs standard. Durable powder-coated epoxy finish. Embedded Staff Control Availible- Please Call for Details 400 lb weight capacity. UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved. Designed to meet the requirements of applicable HCPCS codes. Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years Inventory Stock Code Description Color Packaging HCPCS AF4001 Spring Deck, Fixed Height, 76" Length 1 ea E0291 AF4101 Spring Deck, Fixed Height, 80" Length 1 ea E0291 AF4011 Pan Deck, Fixed Height, 76" Length 1 ea E0291 AF4111 Pan Deck, Fixed Height, 80" Length 1 ea E0291 AF4000 Spring Deck, Manual Hi-Lo, 76" Length 1 ea E0293 AF4100 Spring Deck, Manual Hi-Lo, 80" Length 1 ea E0293 AF4010 Pan Deck, Manual Hi-Lo, 76" Length 1 ea E0293 AF4110 Pan Deck, Manual Hi-Lo, 80" Length 1 ea E0293 AF4005 Spring Deck, Semi-Electric, 76" Length 1 ea E0295 AF4105 Spring Deck, Semi-Electric, 80" Length 1 ea E0295 AF4015 Pan Deck, Semi-Electric, 76" Length 1 ea E0295 AF4115 Pan Deck, Semi-Electric, 80" Length 1 ea E0295 AF4004 Spring Deck, Full-Electric, 76" Length 1 ea E0297 AF4104 Spring Deck, Full-Electric, 80" Length 1 ea E0297 AF4014 Pan Deck, Full-Electric, 76" Length 1 ea E0297 AF4114 Pan Deck, Full-Electric, 80" Length 1 ea E0297 AB46300 Head and Foot Boards Light Oak Finish AB48300 Head and Foot Boards Medium Oak Finish AB80300 Head and Foot Boards Dark Walnut Finish A7040 Half Head Rails (Set) A7050 Half Foot Rails (Set) A7060 3/4 Length Rail- 54" Length (Set) A7070 Full Length Rail- 66" Length (Set) AZ7350 Assist Bar (1 Each) A65476 Wall Saver Bumpers, 76" Bed A65480 Wall Saver Bumpers, 80" Bed 999-0700-355 Factory-Installed options - Pull Pin Pendant L/O CA 554-0658-000 Factory-Installed options - Edema Foot Ratchet 555-0206-902 Emergency Crank 554-0639-000 Trapeze Adapter 556-0005-000 Traction Frame Adapter (2 Req) 554-0143-000 Trapeze Bar (Patient Helper Bar) 554-0190-000 Panel-Mounted I.V. Holder 554-0713-000 Side Mattress Retainer (Pair)
height for people who roll out of the bed to prevent injury.
Product Detail The comes with many standard features, including sleep deck height adjustment from 8.75 " to 25.25" and a single motor for Hi-Lo function that ensures the bed is always level. It has a dynamic operating capacity of 400 lb and meets the highest UL safety standards for medical beds UL60601 and EN60601. The bed may be rolled or locked at any height with a single-point locking mechanism.It has strong tubular panel mounting which enables the bed to be pushed or pulled by footboard, and built-in stabilizer feet that ensure the bed will automatically lock in the lowest position. The bed system is patent pending.Specifications: Sleep deck dimensions: 35" width, and 76" or 80" sleep deck lengths. Maximum head elevation of 70 degrees. Sleep surface constructed of strong steel wire grid: no plastic or springs are used. Rigid construction utilizing heavy tubular steel to maximize strength and stability of the sleep surface in all positions. All weldments and components are electrostatically powder-coated or plated. 115-Volt standard. 230 Volt available Full-Electric operation with only three ultra whisper quiet, rapid-moving DC motors. Standard with handheld 6-function control.Additional Accessories - Please Call for Details: Foot Half Rails Wall Saver Bumpers Edema Foot Ratchet Pan Deck Sleep Surface 4" Sleep Deck Extension Trapeze AdapterWarranty: Welded steel bed frame: Limited Lifetime. All other components: Five Years. Electronics: Two Years Inventory Stock Code Description Color Packaging HCPCS MP5074 Grid Deck, Full-Electric, 76" Length 1 ea E0297 MP5714 Grid Deck, Full-Electric, 80" Length 1 ea E0297 Z46500 Head and Foot Boards Light Oak Finish Z48500 Head and Foot Boards Medium Oak Finish Z80500 Head and Foot Boards Dark Walnut Finish Z46550 Head and Foot Boards, Staff Control Option Light Oak Finish Z48550 Head and Foot Boards, Staff Control Option Medium Oak Finish Z80550 Head and Foot Boards, Staff Control Option Dark Walnut Finish ZA7020 Half Head Rails (Set) AZ7350 Assist Bar (1 Each) ZL71510 Factory-Installed option - Single-Function Lock-Out ZL71530 Factory-Installed option - Three-Function Lock-Out ZL74700 Factory-Installed option - Embedded Staff Control 999-0711-005 Factory-Installed option - Grounded Hospital-Grade Plug 999-0711-003 Back-Up Battery Pack 999-0711-002 Back-Up Battery Charger 554-0143-000 Trapeze Bar (Patient Helper Bar) 554-0190-000 Panel-Mounted I.V. Holder 554-0713-000 Side Mattress Retainer (Pair)
Two sizes, 39" X 84" and 48" X 84" Patient weight capacity 650 pounds Fully electric operation, pendant controls Split frame construction Quick disconnect cables for easy assembly High / low adjustable 15.75" to 32.5" Fowler back rest and leg lift functions Drop down removable side rails Laminate oak finish head and foot boards Model 3639, 41.75" maximum width Model 3648, 50.75" maximum width
Manufacturer: GENDRON
Product Detail The bed that is versatile and designed to meet Long Term Care clinical requirements. From a low 7.9 inches to a high position of 30 inches, the Zenith bed facilitates resident safety and ensures caregiver ease of operation. Powered by three ultra-whisper, rapid-moving, DC motors engineered to keep Hi-Lo function in sync. Its the only bed that youll ever need, and priced so you can afford it! Available in 76" and 80" sleep surface lengths. 450 lb weight capacity. Available with steel-wire grid or pan sleep deck. All welds and components are electrostatic powder-coated to provide durable finish. Standard with eight-function pendant control. UL 2601-1 and CAN/CSA C22.2 No. 601-1-M90 approved. Designed to meet the requirements of applicable HCPCS codes. Warranty: 1. Welded steel bed frame: Limited Lifetime. 2. All other components: Five Years. 3. Electronics: Two Years Inventory Stock Code Description Color Packaging HCPCS ZG5074 Grid Deck, Full-Electric, 76" Length 1 ea E0297 ZG5174 Grid Deck, Full-Electric, 80" Length 1 ea E0297 ZG5014 Pan Deck, Full-Electric, 76" Length 1 ea E0297 ZG5114 Pan Deck, Full-Electric, 80" Length 1 ea E0297 ZZ5074 Grid Deck, Full-Elect. w/ Z-Lok, 76" Length 1 ea E0297 ZZ5174 Grid Deck, Full-Elect. w/ Z-Lok, 80" Length 1 ea E0297 ZZ5014 Pan Deck, Full-Elect. w/ Z-Lok, 76" Length 1 ea E0297 ZZ5114 Pan Deck, Full-Elect. w/ Z-Lok, 80" Length 1 ea E0297 Z46500 Head and Foot Boards Light Oak Finish Z48500 Head and Foot Boards Medium Oak Finish Z80500 Head and Foot Boards Dark Walnut Finish Z46550 Head and Foot Boards, Staff Control Option Light Oak Finish Z48550 Head and Foot Boards, Staff Control Option Medium Oak Finish Z80550 Head and Foot Boards, Staff Control Option Dark Walnut Finish ZA7020 Half Head Rails (Set) ZA7170 Half Foot Rails (Set) AZ7350 Assist Bar (1 Each) Z70300 Wall Saver Bumpers, 76" or 80" Bed ZL71510 Factory-Installed option - Single-Function Lock-Out ZL71530 Factory-Installed option - Three-Function Lock-Out ZL74700 Factory-Installed option - Embedded Staff Control 999-0711-005 Factory-Installed option - Grounded Hospital-Grade Plug 554-0748-000 Factory-Installed option - Edema Foot Ratchet 554-0710-000 Stabilizer Legs 554-0719-000 4" Sleep Deck Extension 999-0711-003 Back-Up Battery Pack 999-0711-002 Back-Up Battery Charger 554-0720-000 Trapeze Adapter 554-0143-000 Trapeze Bar (Patient Helper Bar) 554-0190-000 Panel-Mounted I.V. Holder 554-0713-000 Side Mattress Retainer (Pair)