Mattresses/Low Air Loss Systems

AiroDyne

Alternating Pressure with Low Air Loss

Manufacturer:  PrimaTech

Order / Info Request

Atmosaire 9000 A/AR

Atmosaire 9000 A/AR SAT™, a system of dynamic air chambers and cutoff valves, helps to maximize body weight displacement and minimize tissue interface pressure by automatically reacting to body movement, altitude and temperature by adjusting the internal air pressure
Nine air cylinders offer additional support under the shoulders, seat and legs through non-powered pressure relief via nine zones of horizontal pressure distribution
Power Loss Protection gives uninterrupted pressure relief even in the event of an electrical power failure (alternating pressure and rotation not available without power)
A sloped heel section helps to transfer weight off of the delicate heel and onto the calf and thigh area of the leg.
A firm perimeter provides seating support for the caregiver or patient
Alternating pressure helps to enhance capillary blood flow using a manifold system connected to every other cylinder and powered by an air pump
Rotation helps to enhance pressure point relief through a platform turn of approximately 20°

Manufacturer:  KCI

Order / Info Request

Egress Mattress

Egress Mattress The Egress EZ mattresses are unique designs that give patients added support and
independence when getting in or out of bed. The dual-layer and tri-layer foam have an
exclusive built-in frame and 3" raised bolsters with cut-through handles that provide a place
for patients to get leverage when standing. The egress area is 20" wide. Egress EZ
products include the added relief of a heel soft area. Higher density three layer foam
available in the MATTEZLTCA version.

Manufacturer:  Invacare

Order / Info Request

Gel-Lite® Mattress Overlay

Gel-Lite® Mattress Overlay Gel/foam overlay contains uniquely designed gel bladders which reduce overlay weight significantly and eliminate pooling. Gel-packs are strategically placed between a high density foam base for support and a convoluted (egg crate) foam top for additional comfort. Helps prevent and treat pressure ulcers. Waterproof, washable antibacterial cover with zippers allows convenient replacement for cleaning. 34"W x 78"L x 3½"D. Weighs only 18 lbs. Latex free.

Manufacturer:  Pyramid Industries

Order / Info Request

Low Air Loss Mattress System

Low Air Loss Mattress System The Invacare MNS500-S is a portable low air loss therapy mattress replacement system that provides the therapeutic benefit of pressure relief and skin moisture management. The MNS500-S also provides the benefits of true low air loss for pressure ulcer therapy.
135 liters per minutes of fresh, dry air circulates between the patient and the support surface
8" air cell height for deep patient immersion
Waterproof, vapor permeable therapy pad provides a low friction surface
Provides pressure relief below capillary closure
Pulsate option - every 45 seconds, the pressure increses and decreases in each cell

Manufacturer:  Invacare

Order / Info Request

Low Air Loss Mattress System - Bariatric Width

Low Air Loss Mattress System - Bariatric Width Bariatric Mattress: 80"L x 42"W x 8.5"H
The Invacare MNS500-B is a portable low air loss therapy mattress replacement system that provides the therapeutic benefit of pressure relief and skin moisture management. The MNS500-B also provides the benefits of true low air loss for pressure ulcer therapy.
135 liters per minute of fresh, dry air circulates between the patient and the support surface
8" air cell height for deep patient immersion
Waterproof, vapor permeable therapy pad provides a low friction surface
Provides pressure relief below capillary closure
Pulsate option - every 45 seconds, the pressure increases and decreases in each cell

Manufacturer:  Invacare

Order / Info Request

lumexair

lumexair Product Detail

The LumexAir effectively redistributes patient weight and relieves pressure.
Ideal for situations where maceration and heat build-up are an issue, the LumexAir is suitable for the prevention and treatment of all stages of pressure ulcers.
350 lb. maximum weight capacity
Designed to meet the requirements of HCPCS code: E0277
2 year limited warranty on control unit.
1 year limited warranty on mattress

Mattress:

Mattress contains three deep cell floatation pressure zones to provide greater support as needed in the thigh and buttock region.
The 2" foam base is designed to provide additional support and safety to the patient.
The simple, modular design makes replacement of individual cells and components quick and easy.
Top cover is made of fluid-proof, vapor permeable, low shear nylon with an intermediate fleece cover to enhance evaporation and minimize skin maceration.
Dimensions: 80" x 35" x 10"
Control Unit:

The nearly silent controller offers dial-controlled soft/firm variable operation.
Battery operated alarm sounds to notify caregiver of power loss.
Rapid mattress inflation can be easily achieved by allowing mattress to inflate on maximum setting.
CPR deflation is accomplished by simply disconnecting air lines from pump to release air.

Manufacturer:  graham field

Order / Info Request

microAIR Turn-Q Plus Mattress - Standard Width

microAIR Turn-Q Plus Mattress - Standard Width The microAIR Turn-Q Plus combines the benefits of lateral rotation, true low air loss and pressure relief in a single portable system. The system's two selectable turning angles provide the ability to bilaterally rotate patients a full or partial turn, reducing the risk of complications associated with immobilization.

Therapeutic for Stage III and IV, or multiple Stage II pressure ulcers
Lateral rotation automatically turns patients up to 40 degrees to reduce the risk of pulmonary and other serious medical complications associated with immobilization
Seven selectable turning modes (3 fixed and 4 automatic variable turning positions), provide flexibility to meet individual patient needs
Six turning intervals between 4 minutes and 2 hours meet prescribed turning schedules
Low air loss regulates skin moisture and temperature, an important factor in preserving skin integrity for the prevention of pressure ulcers

Code Approval: UL544, CA106

Dimensions: Standard mattress: 84"L x 37"W x 8"H
Electrical: Power: 115 vac, 50/60 Hz, 2A Leakage current: Less than 100 microamps
Product Weight: Mattress: 25 lb Power unit: 30 lb
Product Weight Capacity: 500 lb
Warranty: Mattress: 6 months Power unit: 2 years

Manufacturer:  Invacare

Order / Info Request

ROHO DRY FLOATATION® Mattress Overlay

ROHO DRY FLOATATION® Mattress Overlay The Original non-powered, adjustable, zoned, advanced pressure-relieving mattress overlay.

Manufacturer:  ROHO Group

Order / Info Request

ROHO PRODIGY Mattress Overlay

ROHO PRODIGY Mattress Overlay Non-powered mattress overlay designed for individuals who are at risk for breakdown and/or have a Stage I or Stage II ischemic ulcer.

Manufacturer:  ROHO Group

Order / Info Request

SELECTAIR® SYSTEM

SELECTAIR® SYSTEM SelectAir® low air loss mattress systems are a complete line that offers the most cost-effective alternative for skin protection and pressure sore prevention.

• Reliable, whisper-quiet operation

• Portable and lightweight

• Low energy consumption

• User-friendly control panel

• Microprocessor controlled

• Firm mattress mode with timer to facilitate nursing care during dressing change and patient repositioning

• Custom sizes available. Contact Customer Service

SelectAir® System includes: SelectAir®Pump, Mattress with foot pillow, zippered "Nylon" cover with foot pillow and a one-inch foam pad.

Medicare Code: E0277




Manufacturer:  ROHO Group

Order / Info Request

TriCell™

TriCell™ Genuine Low Air-loss.The First Step® is a pressure relieving, low air-loss therapeutic mattress support system designed to help prevent and treat pressure ulcers.New 'ultra soft' breathable GORE-TEX® fabric cushion strips and cover sheets help speed healing.

Manufacturer:  KCI

Order / Info Request

Ultra-Care Excel II

Ultra-Care Excel II

*Alternating Mattress Replacement System combines Low-Airloss to manage and treat pressure ulcers at any stage

*Portable mattress products fits on most hospital bed frames

*Audio and visual low-pressure alarms

*Requires little maintenance and easy to set-up

*Low friction cover

*Front panel switch allows a choice of therapies

Manufacturer:  Pyramid Industries

Order / Info Request

 

More Products

 

 

 

Back to Top

Web Site Navigation

Web Site Created And Powered By VGM Forbin